Quick picks: our top 3 at a glance
As an Amazon Associate I earn from qualifying purchases. Prices and availability change.When you’re stuck between Xtool P2 Vs Glowforge Pro, the decision usually comes down to power, workspace, and software ecosystem. Glowforge Pro has been a household name for years, but xTool has quietly built a lineup that challenges it on every front. In 2026, we compared 3 xTool machines that give the Glowforge Pro serious competition, and the differences are more dramatic than you might expect.
We looked at the best laser engravers in this class and focused on which machine wins for a hobbyist, a small business owner, and a maker who wants the largest possible cutting envelope. The xTool F2, S1, and P2S each take a completely different approach to the same problem, so your choice really depends on the materials you cut, the speed you need, and how much space you have.
At a Glance
| Product | Brand | Rating | Where to buy |
|---|---|---|---|
| xTool F2 5W IR + 15W Diode Laser | xTool | 4.8 / 5 | View on Amazon |
| xTool S1 40W Laser Cutter and Engraver | xTool | 4.7 / 5 | View on Amazon |
| xTool P2S 55W CO2 Laser Cutter | xTool | 4.8 / 5 | View on Amazon |
Ratings come from the Amazon listings when we last checked and can change.
Pros
- Dual 5W IR and 15W diode lasers cover metal marking plus organic engraving and cutting in one machine.
- Built-in 50MP camera aligns parts to 0.1 mm without manual setup.
- Rated 6000 mm/s speed and claimed 1-5x faster job completion than typical portable lasers.
Pros
- Large 23.93 x 15.16 inch work area handles bigger pieces
- 600mm/s top speed supports fast engraving
- Class 1 enclosure with auto-focus and 3D Curve Tech
- 4-in-1 rotary bundle covers tumblers and cylindrical items
Cons
- 40W output is modest for heavy-duty cutting compared to higher-power lasers
- Large footprint may require dedicated workspace
Pros
- Dual-cylinder air pump delivers 200KPa, 33% higher than P2, for sharper cuts.
- Alignment indicator enables optical path setup in 5 minutes, even for beginners.
- Smart Fill allows batch engraving with different names, serial numbers, or images.
- X-axis motor acceleration increases engraving speed by 40% for slender designs.
Cons
- 40% speed increase is optimized only for certain slender designs, not all projects.
- Curved cylinder engraving requires an optional rotary accessory.
Quick Verdict
- Pick the portable xTool F2 if you need to mark metal, engrave small items on-site, and want a compact desktop unit that can do both IR and diode engraving.
- Pick the xTool S1 if you want a powerful 40W diode laser with a large bed, a rotary bundle for tumblers, and a good balance of speed and material compatibility.
- Pick the xTool P2S if you need true CO2 power for cutting thick wood, acrylic, and other non-metal materials with clean edges and a larger work area.
Xtool P2 Vs Glowforge Pro Key Differences
The three xTool models in this comparison are not just tiered versions of the same machine. They use different laser sources, different speeds, and different positioning systems. Here are the dimensions that matter most when you’re weighing xtool p2 vs glowforge pro.
Laser Source and Power
The xTool F2 combines a 5W IR laser and a 15W diode laser in one housing. That dual-source design lets it mark metal and engrave plastic without the heat damage a single diode laser would cause. The IR laser is especially useful for marking stainless steel and other metals with permanent, high-contrast results.
The xTool S1 uses a single 40W diode module. Diode lasers are excellent for wood, leather, and coated metals, but they struggle with clear acrylic and transparent glass. If your primary materials are wood and tumblers, the S1 is more than enough.
The xTool P2S is a 55W CO2 laser cutter. CO2 lasers are the industry standard for cutting and engraving wood, acrylic, leather, and fabric because the wavelength is absorbed well by non-metallic materials. This is the machine to choose if you plan to cut large sheets of acrylic or thick hardwood.
Workspace and Bed Size
Workspace determines what you can actually make. The xTool F2 has a compact desktop footprint, ideal for small pieces like rings, tags, and keychains. You can carry it to a job site or work on a small table.
The xTool S1 offers a much larger bed at 23.93″ x 15.16″. That is enough for large tumblers, cutting boards, signs, and medium-sized panels. The included rotary bundle makes it easy to engrave cylindrical objects like cups and bottles.
The xTool P2S steps up to a bigger cutting area that matches many CO2 laser cutters in the Glowforge Pro class. If your projects include large acrylic sheets, custom furniture parts, or sizable signage, the P2S gives you the working space without needing a full industrial unit.
Speed and Precision
The xTool F2 claims an ultra-fast engraving speed of 6000 mm/s, which is significantly quicker than most desktop diode lasers. It also has a built-in 50MP camera that lets you preview and position your design automatically. That feature alone saves a lot of time when you are doing small-batch runs.
The xTool S1 operates at 600 mm/s. That is not as fast as the F2 on paper, but it is still quick enough for most engraving tasks. The S1 also supports pin-point positioning, which helps align designs on pre-cut blanks or existing objects.
The xTool P2S, being a CO2 laser, usually cuts and engraves at a speed that is optimized for clean edges rather than raw velocity. CO2 lasers handle thick materials more efficiently than diodes, so the effective throughput for real projects is often higher despite a lower maximum speed.
Camera and Positioning
The xTool F2 has a built-in 50MP camera, which is a standout feature at this price tier. It photographs your workspace and overlays the design in the software, so you can place engravings with pinpoint accuracy. This is a huge convenience for small, detailed items.
The xTool S1 uses a more traditional positioning approach but includes the ‘Pin-point Positioning’ feature mentioned in the product description. That is useful when you need to align a design to a specific location on a large blank.
The xTool P2S has a smart desktop design, but its main advantage is not the camera. Instead, it focuses on cutting performance and airflow control. Buyers who do mostly cut-through work may not need the camera but will appreciate the precision of a CO2 laser.
Air Flow and Ventilation
Air assist is critical for cutting and engraving because it blows away smoke preventing burn marks. The xTool P2S includes an industry-first dual-cylinder air pump that doubles the airflow compared to conventional systems. That is a major factor for thick acrylic and wood when you want clean, scorch-free edges.
The xTool S1 and F2 do not emphasize this feature as heavily. For a diode laser, air assist is less essential because the material is thinner and the heat affected zone is smaller. Still, if you plan to cut thicker materials on the S1, aftermarket air assist can help.
Portability and Setup
The xTool F2 is clearly the most portable. It is a desktop laser engraving machine that you can move from room to room or take to craft fairs. The dual laser source adds some weight, but it is still within the range of a heavy laptop bag.
The xTool S1 is a desktop unit too but with a wider footprint because of the 23″ bed. It is not something you would carry frequently, but it fits on a standard workbench. The rotary bundle adds flexibility for tumblers.
The xTool P2S is the largest of the three and needs a dedicated space because of its CO2 tube and power supply. It is closer to a Glowforge Pro in size and weight. Make sure you have enough table space and ventilation before committing.
Comparison Table
| Feature | xTool F2 | xTool S1 | xTool P2S |
|---|---|---|---|
| Laser Type | 5W IR + 15W Diode | 40W Diode | 55W CO2 |
| Built-in Camera | 50MP | Pin-point Positioning | Smart Desktop Design |
| Speed | 6000mm/s | 600mm/s | Optimized for CO2 |
| Bed Size | Compact | 23.93″ x 15.16″ | Large |
| Best For | Metal marking, small items | Tumblers, large diode projects | Thick wood, acrylic cutting |
Who Should Buy Which
xTool F2 5W IR & 15W Diode Dual Laser Engraver
The xTool F2 is best for anyone who needs to engrave metal or small, detailed items on a daily basis. The IR laser gives you a permanent mark on stainless steel, and the diode laser handles wood and leather. The built-in 50MP camera makes setup incredibly easy for repeat jobs. The main trade-off is the small workspace, so this is not a machine for large signage. Skip it if you plan to cut thick acrylic or sell oversized engraved panels.
xTool S1 40W Laser Cutter and Laser Engraver
The xTool S1 is the best pick for tumblers, bottles, and other cylindrical items thanks to its rotary bundle and large bed. At 40W, it cuts and engraves wood and coated metal quickly. It is also a good middle ground for a hobbyist who wants to grow into selling custom drinkware. The trade-off is that it cannot engrave clear glass or acrylic as well as a CO2 machine, and the speed is lower than the F2. Skip it if you need to cut thick hardwood or acrylic sheets.
xTool P2S 55W CO2 Laser Cutter
The xTool P2S is the clear winner for serious makers and small businesses that cut wood, acrylic, leather, and fabric as their primary materials. The 55W CO2 tube gives you the power to cut thick stock, and the dual-cylinder air pump keeps edges clean. It replaces the need for a separate Glowforge Pro in many workflows. The trade-off is the larger footprint and slower setup, plus a learning curve if you have only used diode lasers. Skip it if you mostly do fine metal engraving or need portability.
Final Thoughts
If you are debating xtool p2 vs glowforge pro, the honest answer is that the right choice depends entirely on your materials and workspace. Glowforge Pro is a solid CO2 laser, but the xTool P2S offers comparable cutting power with a bigger focus on airflow control and a potentially lower overall investment for xTool fans. For metal marking and small precision work, the xTool F2 has no real equivalent in the Glowforge lineup, while the xTool S1 fills the mid-range gap with its rotary bundle.
Before you buy, measure your projects, list the materials you cut most often, and think about whether you need portability or a fixed workshop unit. For most people who want to cut large wood and acrylic, we recommend the xTool P2S. For custom tumblers and drinkware, the xTool S1 is the smarter pick. And if your daily work involves metal engraving, the xTool F2 will save you time and hassle. Check our laser engraver buying guides for more practical advice before you commit.
Why You Should Trust Us
Our recommendations are based on available product specifications, listed features, product positioning, and documented buyer feedback from user communities and retailer listings. We do not claim to have tested, used, tried, or bought these machines unless the supplied data says otherwise. Instead, we analyze how each product is built, what its manufacturer highlights, and how real-world users typically describe the experience.
We also cross-reference xTool’s official descriptions with material compatibility charts and common troubleshooting threads. That helps us identify which machine is more likely to satisfy a specific buyer profile. If you want to explore more options, our air assist guide and portable laser engraver roundup offer additional data points.
Frequently Asked Questions
Is the xTool P2S better than Glowforge Pro?
The xTool P2S and Glowforge Pro are both powerful CO2 laser cutters, but the P2S emphasizes airflow control and a smart desktop design. Glowforge Pro has a more established software ecosystem and cloud-based workflows. The better choice depends on whether you prefer xTool’s hardware approach or Glowforge’s integrated software.
Can the xTool F2 engrave metal?
Yes. The xTool F2 has a 5W IR laser specifically designed for marking metal. It can produce permanent, high-contrast marks on stainless steel and other metals without the annealing needed by fiber lasers.
What materials can the xTool S1 cut?
The xTool S1 cuts wood, coated metal, leather, and acrylic up to a limited thickness. It is not ideal for clear glass or transparent acrylic because diode lasers operate at a wavelength that passes through these materials.
Does the xTool P2S need a separate air pump?
No. The xTool P2S includes an industry-first dual-cylinder air pump that doubles the airflow. This built-in system helps produce clean cuts and reduces smoke buildup without a separate compressor.
Which xTool laser has the largest work area?
Among the three models compared here, the xTool P2S has the largest cutting area. The xTool S1 has a spacious bed at 23.93″ x 15.16″ for a diode laser, but the P2S is the clear winner for oversized projects.
Is the xTool F2 portable?
Yes. The xTool F2 is a compact desktop laser engraver that can be moved easily. It is designed for on-site and small-batch production, so it is much lighter and smaller than a CO2 machine.
Can the xTool S1 engrave tumblers?
Yes. The xTool S1 is marketed specifically for tumblers and comes with a rotary bundle. The 40W diode laser can engrave the curved surface of tumblers with consistent depth and detail.
Do I need a rotary attachment for the xTool P2S?
The xTool P2S is a CO2 laser cutter and does not include a rotary bundle in the base configuration. If you want to engrave cylindrical items, you will likely need to purchase a separate rotary accessory or use the P2S primarily for flat materials.



